超高分子量聚乙烯纤维增强中空蜂窝模压复合材料性能研究

为研制车船等壳体所用的轻质、高强复合板材,选用超高分子量聚乙烯(UHMWPE)短纤维纱,制备成单层经纬为120根/(10 cm)的平纹组织,采用多组经纱持续更替交织层的方法制成2L(1+0)型、4L(2+1)型、6L(3+2)型3种多层角联锁结构织物,采用扦插芯棒、模压成型方法制成菱形蜂窝状的热固性环氧树脂基中空板,并与2块真空吸液法制成的面板组成“三合一”复合板,同时测定了复合板材的结构特征及其平拉、平压和弯曲性能。结果表明:3种类型复合板的密度均远小于水的密度,其中6L(3+2)型最小,为0.48 g/cm³;复合板层数越多,环氧树脂越难渗透尤其是在中空板菱形交叉点处,复合板平拉、平压、抗弯曲强度则呈现递增,制成的6L(3+2)型复合板试样平压强度可达到1.03 MPa。     

超高效液相色谱⁃四极杆⁃飞行时间质谱对含PET食品接触材料中可迁移非挥发性物质的筛查研究

采用超高效液相色谱⁃四极杆⁃飞行时间高分辨质谱（UPLC⁃Q⁃TOF）对4类不同类型的含聚对苯二甲酸乙二醇酯（PET）材质的食品接触材料在4 %乙酸和50 %乙醇模拟物中的迁移出的非挥发性未知物进行筛查解析。结果表明，产品在4 %乙酸模拟物的迁移风险远小于50 %乙醇模拟物，主要迁移物质为聚合单体形成的寡聚物，抗氧剂、润滑剂、胶黏剂等加工助剂以及生产加工、迁移过程中形成的非有意添加物（NIAS）物质；纯PET材质的产品迁移物质较少，多层复合材料迁移物质较多。复合材质的产品中，PET材质可能在生产时添加了己二酸、癸二酸、新戊二醇等物质，进行了改性处理；此外，部分迁移物质会与模拟物中的乙醇发生反应，生成新的NIAS物质。     

Delivery of cisplatin by folic acid-targeted liposomal nanoparticles into liver cancer cell line

This study aimed to prepare cisplatin-loaded PEGylated liposomal nanoparticles targeted with folic acid and evaluate their efficacy on liver cancer cell line PLC/PRF/5 (Alexander hepatoma cell line). Nanoparticles were prepared by reverse phase evaporation technique and characterized by dynamic light scattering, scanning electron microscopy, transmission electron microscopy, inductively coupled plasma optical emission spectrometry, Fourier transform infrared spectroscopy, and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide techniques. Nanoscale particles with appropriate drug encapsulation efficiency (13%) were prepared. Cytotoxicity results indicated that the superior potency of targeted cisplatin-loaded nanoparticles compared to the nontargeted counterpart with 23% more cytotoxicity. Findings of this study confirmed the potency of targeted PEGylated liposomal nanoparticles.     

Time and thermal stability improvement of polyethylene ferroelectrets

Ferroelectrets with good piezoelectric coefficients have been produced based on cellular polyethylene (PE) via extrusion film blowing. The quasi-static piezoelectric coefficient (d₃₃) value obtained (935 pC/N) was well above typical values for cellular polypropylene (PP) considered as the workhorse of piezoelectric polymers. Here, a focus was made on increasing the time and thermal stability of cellular PE piezoelectric activity. To do so, specific thermal treatments were applied on the films to improve their microstructure. First, films crystallinity was increased via thermal annealing at 80 °C for 5 min leading to a 32% increase of the initial d₃₃ value as well as its time stability. However, thermal treatment did not give a significant thermal stability improvement because the treated films almost completely lost their piezoelectric activity (96%) at 80 °C. Therefore, the films were treated with orthophosphoric acid resulting in substantial charge stability improvements, especially at higher temperature. Overall, it was possible to increase the continuous service temperature (CST) of PE ferroelectrets from 40 to 80 °C, which is similar to the typical CST of PP. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47646.     

蛋类礼盒包装结构的缓冲性能研究

目的研究蛋类礼盒包装结构的缓冲性能。方法以蛋类尺寸为基础,建立可发性聚乙烯(expandable polyethylene. EPE)缓冲单元结构和组合结构,进行静态仿真分析和实验验证,比较结构在形状、叠合层数、组合形式等参数变化时的载荷与位移。结果结构层数变化相同时,单元结构的极限载荷从143N增加到236 N,组合结构的极限载荷从224 N增加到476 N,均呈近线性增长。结论蛋类礼盒包装中,组合结构的承载能力优于单元结构,通过单元结构的组合,可满足不同蛋类的包装要求。     

纳米氧化锌/低密度聚乙烯膜中锌向食品的迁移研究

目的研究纳米氧化锌/低密度聚乙烯膜(low density polyethylene film,LDPE)中锌(Zn)向食品的迁移行为,探究其迁移规律。方法选取2种食品模拟物(3%乙酸及超纯水)及真实食品(食用白醋及瓶装水),在3种不同实验温度下(70、40及20℃),研究锌向食品模拟物的迁移规律。采用扫描电子显微镜(scanning electron microscope,SEM)和原子力显微镜(atomic force microscope,AFM)表征纳米ZnO/LDPE膜的表面形貌。结果锌向酸性模拟物中的迁移率远远大于水性模拟物中的迁移率,其中锌向酸性模拟物中的最大迁移率分别为22.7%,20.3%及18.6%(ZL-1,ZL-2及ZL-2#),向水性模拟物中的最大迁移率分别为9.9%,5.7%及4.9%(ZL-1,ZL-2及ZL-2#);锌向酸性食品的迁移量(1.59~5.03 mg/g)同样高于向水性食品的迁移量(2.98~24.60μg/g);随着纳米ZnO的初始含量变大迁移率变小;而偶联剂的加入对锌的迁移有一定的抑制作用。随着纳米ZnO浓度的增加,在薄膜中观察到纳米ZnO的不规则形貌。结论纳米ZnO/LDPE膜不适合在高温下包装食物,且其在酸性食品中的安全隐患高于水性食品。     

利用KH560和纳米SiO2采用“一步法”反应挤出增黏PET

以KH560（3-缩水甘油基氧基丙基三甲氧基硅烷）和纳米SiO₂颗粒复配作为扩链剂，采用“一步法”反应挤出增黏聚对苯二甲酸乙二醇酯（PET）。KH560和SiO₂的添加量均为PET质量分数的2.5%时，增黏效果最好。并且在PET不干燥的情况下，KH560和SiO₂复配也可增加PET的黏度，可用作PET的扩链剂和防水解剂。经透射电镜观察，发现SiO₂在PET中的分散状况良好。用FTIR研究了KH560、SiO₂、PET三者之间的反应机理。用TGA分析了SiO₂的接枝率，发现接枝率高达72.0%。用DSC对PET/纳米SiO₂复合材料的结晶行为进行了研究，并讨论了结晶行为对力学性能的影响。当KH560和SiO₂的添加量均为PET质量分数的2.5%时，结晶度最低，综合力学性能最好。     

高密度聚乙烯/铅硼复合材料屏蔽性能和力学性能研究

研究了高密度聚乙烯/铅硼复合材料的屏蔽性能和力学性能，通过屏蔽仿真比较了密度及碳化硼（B4C）含量对屏蔽性能的影响，通过试验比较了B4C含量对屏蔽性能、弯曲强度及冲击强度的影响。仿真结果表明,随聚乙烯/铅硼复合材料密度升高，快中子屏蔽性能下降，热中子屏蔽性能和γ屏蔽性能提高；保持聚乙烯/铅硼复合材料密度不变，随B4C含量的提高，中子屏蔽性能提高而γ屏蔽性能下降;实验数据表明,随B4C含量的升高，高密度聚乙烯/铅硼材料的快中子屏蔽性能、热中子屏蔽性能升高，γ屏蔽系数下降，冲击强度和弯曲强度下降明显，屏蔽性能测试结果和仿真结果规律性相符；综合仿真结果和实验数据表明，含B4C 2 %左右的高密度聚乙烯/铅硼复合材料同时具有较好的屏蔽性能和力学性能。     

Fabrication of fullerene decorated by iron compound and its effect on the thermal stability and flammability for high-density polyethylene

Fullerene decorated by iron compound (C₆₀-Fe) is fabricated via solution reaction and characterized by transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), wide-angle X-ray diffraction (XRD), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). Upon incorporating C₆₀-Fe into high-density polyethylene (HDPE) matrix by melt blending, the thermal and thermo-oxidative stability of HDPE are considerably increased, the oxidative induction time (OIT) is dramatically extend. When the concentration of C₆₀-Fe reached 5 wt%, the onset degradation temperature in air increased from 352°C to 422°C, and the OIT dramatically delayed from 4.5 to 47.8 minutes. Moreover, from microscale combustion calorimetry (MCC), C₆₀-Fe can reduce the peak heat release rate (PHRR), heat release capacity (HRC), and total heat release (THR) values of the composites, all of which are very important parameters for evaluating the fire retardancy of a polymeric material.